| JG M4 Sold | |
|
|
Author | Message |
---|
JoseS13
Posts : 97 Join date : 2009-12-20 Age : 45 Location : Winter Garden
| |
| |
autoxgt COLONEL-OFFICIAL AIRSMITH
Posts : 495 Join date : 2009-12-31 Age : 43 Location : Altamonte Springs
| Subject: Re: JG M4 Sold Sun Mar 28, 2010 7:29 pm | |
| I ran with the gun today and got 7 kills. Gun work like a new gun should. I ran probably 400-600 round through it with no hicups. | |
|
| |
JoseS13
Posts : 97 Join date : 2009-12-20 Age : 45 Location : Winter Garden
| Subject: Re: JG M4 Sold Sun Mar 28, 2010 8:03 pm | |
| | |
|
| |
HoldenV CAPTAIN
Posts : 501 Join date : 2010-02-07 Age : 42 Location : Melbourne
| Subject: Re: JG M4 Sold Sun Mar 28, 2010 8:15 pm | |
| Jose does this have the black gearbox or silver one? | |
|
| |
JoseS13
Posts : 97 Join date : 2009-12-20 Age : 45 Location : Winter Garden
| Subject: Re: JG M4 Sold Sun Mar 28, 2010 8:21 pm | |
| | |
|
| |
autoxgt COLONEL-OFFICIAL AIRSMITH
Posts : 495 Join date : 2009-12-31 Age : 43 Location : Altamonte Springs
| Subject: Re: JG M4 Sold Sun Mar 28, 2010 8:49 pm | |
| Its the same gun I started with. Mine shot 345+-FPS at 16-17RPS with the 8.4. I ran 19-20 rps with a 9.6 before I swapped to the black box. | |
|
| |
HoldenV CAPTAIN
Posts : 501 Join date : 2010-02-07 Age : 42 Location : Melbourne
| Subject: Re: JG M4 Sold Sun Mar 28, 2010 9:14 pm | |
| Oh silver is fine that is what I am going to use in the stubby for the ft. pierce game I was just wondering because I would like to get another one with the black box. | |
|
| |
autoxgt COLONEL-OFFICIAL AIRSMITH
Posts : 495 Join date : 2009-12-31 Age : 43 Location : Altamonte Springs
| Subject: Re: JG M4 Sold Sun Mar 28, 2010 9:18 pm | |
| I didnt have any problems with my silve box til I was at 30-31rps, than it cracked at the cylinder head. It was all modified stock parts except fot the piston and head. | |
|
| |
JoseS13
Posts : 97 Join date : 2009-12-20 Age : 45 Location : Winter Garden
| Subject: Re: JG M4 Sold Sun Mar 28, 2010 9:20 pm | |
| What battery were you using? 11.1 lipo? | |
|
| |
autoxgt COLONEL-OFFICIAL AIRSMITH
Posts : 495 Join date : 2009-12-31 Age : 43 Location : Altamonte Springs
| Subject: Re: JG M4 Sold Sun Mar 28, 2010 9:35 pm | |
| 10.8v 1500mah NiMH, M120 linier spring, SS 4 theeth, Swiss cheesed piston, ported BB piston head, BB spring guide, used cheeteh MOSFT and a turbo motor. 29-31rps at 308-315fps.
Last edited by autoxgt on Sun Mar 28, 2010 10:50 pm; edited 1 time in total | |
|
| |
Opheria
Posts : 335 Join date : 2010-03-11 Age : 38 Location : Everywhere and nowhere
| Subject: Re: JG M4 Sold Sun Mar 28, 2010 10:17 pm | |
| If you can wait a week or two I might be able to offer you $100-$110 for it. What is the magazine cap and range for it and is it a metal or plastic body? | |
|
| |
autoxgt COLONEL-OFFICIAL AIRSMITH
Posts : 495 Join date : 2009-12-31 Age : 43 Location : Altamonte Springs
| Subject: Re: JG M4 Sold Sun Mar 28, 2010 10:48 pm | |
| Its a plastic body. Very durable. The only problem I;v had with mine was self induced. 300rd high-cap winding mag. 8.4v battery. Can fit a 10.8v 1500mah. With proper hop-up adjustment it will hit at 125'-150'. When I added a Madbull 6.03 TB and bucking, I could hit center mass at 175'. | |
|
| |
JoseS13
Posts : 97 Join date : 2009-12-20 Age : 45 Location : Winter Garden
| Subject: Re: JG M4 Sold Mon Mar 29, 2010 4:27 am | |
| If it's not sold by then its yours. | |
|
| |
JoseS13
Posts : 97 Join date : 2009-12-20 Age : 45 Location : Winter Garden
| Subject: Re: JG M4 Sold Fri Apr 02, 2010 4:30 pm | |
| | |
|
| |
Sponsored content
| Subject: Re: JG M4 Sold | |
| |
|
| |
| JG M4 Sold | |
|